SIREN 12
This is basically a lengthened Goblin able to take a large rig and built in the same way. A prototype has been well tested off the Cornish coast. This boat is of pram form, exceptionally stable and fitted with buoyancy compartments under the side decks, with an optional further compartment under the foredeck. It has a pivoting centerboard and a lifting rudder. The standard rig is a gunter sloop, with all spars stowing within the length of the boat.

Construction is unusual. The bottom is made first and slit at the ends. These are sprung up to fit end boards, automatically giving the right shape without the use of frames or formers. This is primarily a light, fast sailing boat, which can be carried on the roof of a car, but it can be driven by a small outboard motor up to 3HP. Siren is intended to be sailed by a crew of two, but it can be handled by one or will carry three.

Plywood requirements - 4 sheets 1/4" (6mm) x 4' x 8'.

SIREN 12 - SAILING DINGHY
LENGTH 11' 6"
BEAM4' 6"
DRAFT6" (hull only), 30" (with centerboard)
WEIGHT140 LBS.
SAIL AREA70 SQ.FT.
POWERUP TO 3 H.P.
CONSTRUCTION MATERIAL PLYWOOD
CONSTRUCTION METHODCONVENTIONAL

WHAT IS CONVENTIONAL CONSTRUCTION?

WHAT IS A BRONZE FASTENING KIT ?

Design Number: # B 49
ItemsQuantityUnit Price
Plans and Patterns:[35]
Bronze Fastening Kit:[56]