PAINT ACCESSORIES
K TYPE POLYURETHANE
K Type Polyurethane is a premium marine one part enamel based on a
unique specially formulated blend of polyurethane and chain stopped
alkyd resins. It features excellent gloss retention, abrasion
resistance, adhesion, durability and chemical resistance. For superior
protection over Epoxy-Plus coatings or over a primed wood or fiberglass
surface. It produces a very hard, gelcote like, tough film in 24
hours. So tough that it can be used on floors. Can be used below the
waterline on trailered boats.
Easy to use as it combines a good long wet edge with quick thorough
drying. Levels out exceptionally well without brush marks. Excellent
light fastness, hiding power and long-term durability.
Available in the following colors: Gloss White, Platinum (light gray),
Black, Bikini Blue (light/medium blue), Jade Green (dark green), and
Bright Red.
Application: Brush, roller or spray.
Coverage: 100 sq. ft. per liter (33.8 ozs.)
EPI-PRIME EPOXY PRIMER
A true two-part epoxy product that provides a highly durable, uniform
base which fairs rough surfaces, fills hairline crazing and porosity,
covers superficial blemishes, and cures to a tough barrier coating.
Apply directly to bare wood. Topcoat with K Type Polyurethane. For
wood or fiberglass hulls.
Covers 100 sq. ft. per quart.
HIGH GLOSS VARNISH by Pettit
EASYPOXY HI-BUILD Varnish by Pettit is excellent over Epoxy-Plus and contains substantial amounts of ultraviolet light filter for maximum protection if a clear gloss natural wood finish is desired. Easy Poxy is a heavy body Hi-Build varnish that flows easily; coverage approximately 125 sq. ft. per quart. Recoat time 16 hours at 70 °. Sold in quarts only.
BARE WOOD - BRIGHTWORK
Sand with 200 grit paper. Wipe or vacuum clean to remove residue. Apply varnish as recommended.
©
Clark Craft [clarkcraft.com]
16-99 Aqua Lane, Tonawanda, NY 14150
Tel: (716) 873-2640 Fax: (716) 873-2651
|